Enjoy the Architecture of Guru Ka Tal during Your Agra Tour

Agra, which is located on the banks of the holy Yamuna River in the state of Uttar Pradesh, is world-famous for the majestic Taj Mahal. The city served as a prominent seat of the Mughal Empire for a long period and was the capital of Hindustan during that time. It lies at a distance of about 200 km from the national capital – New Delhi and easily accessible by road, rail and air transport from different parts of the country. The city has an extreme climate in winters and summers, with moderate temperatures in the rest seasons. October to March is considered as the ideal time to visit this historical city. If you wish to witness the grandeur of Taj Mahal and other prominent attractions of this place, such as Agra Fort, Jama Masjid, Moti Masjid, Fatehpur Sikri and Guru Ka Tal, then go for an Agra tour that can be availed from various travel agencies and travel portals.

Guru Ka Tal – History and Architecture

Originally, this reservoir was constructed in the year 1610, during the reign of Emperor Jahangir beside the tomb of Itibar Khan Khwajasara, to collect and preserve rainwater. The walls and embankments of this water reservoir have been made of rubble masonry and brick. It has a square design, with a long and wide ramp paved with stone slabs (khurra) and upright bricks, and stepped ghat. The walls of this structure feature four double-storied towers having an octagonal design. The top storey of these towers boasts of Mughal architecture, with an octagonal spire with brackets and pillars. The material that was used for constructing the ghat was red sandstone while the spire had been decorated with dazzling tiles. Constructed on a four feet high platform, this reservoir features four chhatris on its four corners with 16 pillars, with carved brackets and capitals. The corner domes of this place have a spherical design while the one on the sides have an oblong design.

At the time it was built, this reservoir had 12 towers, but today only eight can be seen. It had effective inlets of northern and western parts of the tank; a canal used for channelling excessive water in to the river and a dam on its south-eastern side. The water collected in this reservoir was used during dry seasons for irrigation. The terrace on the top floor is accessible through a wide red sandstone stairway, located on the southern side.

If you wish to witness Taj Mahal and other important attractions of Agra, then choose for those tour packages that include trips to all these important places. As this city offers a lot of see and to do, it gives the ideal opportunity to experience the best of India holidays.

Importance of AutoCAD in the field of engineering and architecture

Computer has recently entered in every field known to any man and it gives great results when it was used. In the field of architecture and engineering, the need for the computer has become a necessity now a days there is no such work possible, which is made without using a computer. As technology has improved recently, so the choice of technical tools and specific software, which are used in these areas. And for this reason that the CAD or computer aided design and its improved version of the CADD or computer aided design and projects have emerged from behind the scenes to bring a sigh of relief for those who find that it is very hectic and time to sit down and design images of a building and the project plan for the purpose of engineering.

The AutoCAD or computer aided design machine has been a great help to engineers and also for several architectures that are finding it impossible to deal with drawings and plans of the project engineering work and the bring on the verge of perfection. The AutoCAD in these cases helped to design the architectural perfection before designing the actual architecture involved in the project. The AutoCAD has a very user friendly interface and its programming by the end had been done with the help of the famous C + + compiler. It operates in accordance with several other programs such as LISP, Auto LISP, VBA,. NET etc. and this may be one of the suits and tools used by engineers to simplify their work perfect.

Autocad or commonly known as computer aided design is a software application for writing and design 2D and 3D. He came on stage during the month of December nineteen hundred and eighty two. Autocad pioneered programs / DAC held on personal computers, particularly IBM personal computer. Meanwhile, the programs of most other CAD used to run on minicomputers or mainframes that were connected to the terminal graph of each user’s computer. vertical products Autocad and Autocad are incompatible for the type of BitDefender software security.

Appended below are the guidelines for free download for AutoCAD and AutoCAD relevant information about the free download. What we have to do is download the autocad trial for 30 days and learn about the design in 2D and 3D design and documentation platforms. One will have the opportunity of receiving the current version of CAD software with free download autocad. It can shape and design the world around him with the help of powerful and flexible features of AutoCAD design software and documentation, with the help of 2D and 3D worlds leading CAD tools.

Latest Information about Autocad

Spanish Colonial Revival Style Architecture

Spanish revival architecture is hugely popular in California, and increasingly across the nation. The mission revival style and colonial revival styles grew in popularity at the beginning of the 20th century, but people today still chose to emulate the Spanish style when building their homes and public establishments. Why do people continue to use this Spanish style? I argue that the Spanish colonial style represents the very beginnings of the United States on the west coast, and this time in the US history continues to spark peoples imaginations. The aesthetic elements are iconic, and people still commission architects to create the homes of their dreams in this style.

The Spanish Colonial Revival style was created in the United States in the 20th century, and it was sparked after the opening of the Panama Canal. The novel Ramona also had a great influence on the popularity of this architectural style. The early Spanish colonies of North and South America had their particular style of architecture brought from the homeland, and this style was them updated to accommodate the new century in the US. Between 1915 and 1931 this style was all the rage, and movie stars in Hollywood clamored to get their Hollywood hills homes built in this style. Mostly the single-level detached home saw this style. On a personal note, my own grandmother has one of these homes in California, and its pink!

The Spanish Colonial Revival style is very similar to the Spanish Mission Revival style, but with a few key differences. Its also similar to the pueblo styles of the west and southwest, and influenced as well by the arts and crafts movement that was the foundation of these architectural styles. The iconic use of smooth plaster, stucco walls, and chimney finishes, clay tile roofs, terra cotta and concrete ornaments is still a highly noticeable, recognizable style. Other elements include porches and balconies, and Roman arcades and fountains. Youll also see canvas awnings. The most important Spanish Revival architect in California was George Washington Smith who practiced during 1920s and 1930s. Perhaps his most famous house is the Steedman House in Montecito, CA, now a museum called the Casa del Herrero.

But there are other architects who took this Spanish style across the globe. Take for example a lovely Spanish Revival building in St. Louis, by the architect T.P. Barnett, son of George I. Barnett; another famous architect in St. Louis. The T.P. Barnett building is particularly interesting because it also has Art Deco influences, making it one of the most unique buildings in the Grand Center region of St. Louis. Certainly the next time youre in St. Louis, you need to visit this Spanish Revival building on Washington Avenue.

An Initial Introduction To Interior Architecture

Interior architecture can be seen as different from architecture in that the interior rooms, halls, doorways + stairs can be re designed once the initial design for the architecture of the building as a whole is in place. Interior architecture can be used to completely re design, for example a room such as a kitchen, bathroom in a family home which is quite common or a meeting room or office layout in a business environment or modify the existing design based on original architecture.

The interior architecture of a building can be changed for many reasons, either practical, where the interior of a building is going to be used for a new purpose or due to changing fashions or updated technologies. Examples of this are very common in many towns and cities where the exterior of a building is in a style of when it was built, say in the late 19th century but it’s interior has been completely re vamped incorporating modern design fashions and the latest technology.

The use of interior architecture means that for many buildings over a hundred years old the development of the look and design of their interior and exterior could often be the work of many different architects or teams of architects. This has meant for many of our towns and cities the architecture on view can be widely varied and reflect many different periods of time, design fashions and architecture styles. Some of which can be seen as timeless whilst others from certain eras can be seen as garish and bad taste 20 – 30 years down the line.

However no matter what a buildings exterior may look like with the help of interior architects, refurbishment and fit out specialists the interior look and feel of many buildings can be totally transformed with enough time and money bringing them up to date, that is until the latest style, fashion and technologies need integrating a few years down the line.

The main thing to differentiate architecture + interior architecture is that an architect is concerned with the concept of designing a new building the interior architect is concerned with the modification of existing buildings, some of which the design can be seen as timeless and look good for centuries whilst other will be an eye saw and look dated within 10 – 30 years.

This is quite a large and interesting topic, for further reading would advise looking at books + articles, online, in bookshops, news agents or in libraries on architecture, design + interior design.
415 Words

Drafting And Architecture Training

Are you seeking drafting and architecture training? If so, you must understand that in order to become a legal, practicing architect in the United States, you are required to follow a specific educational path, and be licensed.

To attain a professional license, future architects must first attain professional drafting and architecture training from a qualified school. Upon successful graduation, candidates are required to participate in an internship to continue their drafting and architecture training. After that, the student may go on to taking the Architect Registration Examination (ARE) and must receive passing scores on all divisions.

If you are wondering what drafting and architecture training really consists of, the coursework will generally include related subjects such as architectural history, theory, building design, construction techniques, liberal arts, math, physical sciences, professional practice, arts and design, and computer aided drafting (CAD).

If you are serious about a career in drafting and architecture, then a vocational school or community college is a good place to gain your footing. Most employers are seeking experienced and well-educated candidates, so it is important to obtain a solid background in academics and technologies suited for the dual career. Drafting and architecture training that can be transferred to a 4-year college can be used as a stepping stone to a Bachelor Degree in Architecture and Drafting. Some vocational schools offer comprehensive technical training that will lead to a certificate or diploma of completion; others may offer an Associate Degree.

Aspiring professionals who have completed their vocational drafting and architecture training, and have successfully met all requirements of licensure, may earn anywhere from $25,000 to nearly $100,000 per year, depending on combined education and experience.

If you would like to learn more about Drafting and Architecture Training and Drafting and Architecture Schools, or even Online Drafting and Architecture Schools, you can find more in-depth information and resources on our website.

DISCLAIMER: Above is a GENERAL OVERVIEW and may or may not reflect specific practices, courses and/or services associated with ANY ONE particular school(s) that is or is not advertised on our website.

Copyright 2007 – All rights reserved by Media Positive Communications, Inc.

Notice: Publishers are free to use this article on an ezine or website, provided the article is reprinted in its entirety, including copyright and disclaimer, and ALL links remain intact and active.

Know About Iranian Architecture

Iranian architecture displays a class and elegance that cannot be matched with any other style of architecture and design. It is quite distinct from that of Muslim countries. The major features of Iranian architecture are: structural ingenuity basically in vault and dome construction; a skill of decoration with freedom and intricacy incomparable to any other form of architecture.

The pre-Islamic buildings include the remarkable Elamite ziggurat at Chogha Zanbil. Baked brick was used for outer surfaces by the 12th century BC. Most of the greatest buildings were built with a religious purpose, and even in secular buildings religious influences are entirely absent. Palaces were present, and their shapes, sizes and colors varied according to the ruling dynasty.

The first great development of ancient Persian architecture took place under the Achaemenid dynasty during the Persian Empire, from about 550 to 330 BC. There are numerous remains of Achaemenian period, including two palaces, a sacred precinct, a citadel, a tower, and the tomb of Cyrus.

Royal architecture under the Achaemenid also included tombs cut in solid rock, of which the best-known examples are those at Naqshah Rostam near Persepolis. Little is known of the popular building practices of the period, but archaeologists believe that the ordinary dwelling was made of mud brick. After the conquest of Persia by Alexander the Great, Greek influence, in its late, Hellenistic phase, was predominant in the arts of Persia. Examples include fragments of bronze sculpture found at Shami, and the Parthian sculptural reliefs at Behistun.

During the Islamic period “mosques” became the major buildings in Iranian architecture. Outstanding examples of early Islamic Iranian architecture include the Mosque of Baghdad built in 764, the Great Mosque at Samarra erected in 847, and the early 10th-century mosque at Nayin.

After the 17th century, Iranian artists copied European paintings and engravings, and the native traditions declined. But Iranian architecture still managed to leave a huge impact on the world.

Architecture A Brief Introduction and Marketing Tips

Architecture is an art and science that marries the building and design of structures. In some ways one can say that, along with engineering, it is the sign of civilization. Once man was able to settle down and fashion his own dwelling, even by primitive means, this was the start of the first civilizations.

Originally, these structures were purely functional serving to keep people safe from bad weather and wild animals, and to give them privacy. But as modern construction procedures were developed, along with more advanced materials, architecture and engineering began to take a more artistic leaning.

The earliest treatise on the subject, De Architectura, was written by Vitruvius, dates back to the 1st Century CE. In it, the Roman architect says that a building has to have form, function, and durability. To this day, most architects still conform to those three tenets. It is probably even safe to say that some are more successful at adhering to those dogmas than others.

A few examples of these people are Frank Lloyd Wright, a major proponent of organic architecture who is often touted to be the greatest American architect of all time (famous for the house called Fallingwater and for the Guggenheim Museum in New York City); I.M. Pei, a master of modern architecture who created the pyramid at the Louvre and the Bank of China Tower in Hong Kong; Frank Gehry, who designed the Dancing House in Prague; and the landscape architect and artist, Isamu Noguchi, among many others.

If these names sound familiar to you, it’s probably because their works are admired the world for being beautiful while being both functional and enduring. You’re likely to see their buildings mentioned in architectural texts, art books and even featured in architecture postcard designs. These, by the way, are not only proof of how respected the geniuses mentioned above are but, also function as a way to market their work. Like a portfolio, one might say.

In fact, some people in the business might publish high quality books that double as coffee table books and company profiles. Or, perhaps, they might have architecture postcard designs and construction postcard designs printed on elegant cards to send to potential clients. Others still, might support these efforts with their own websites.

Architecture Today Getting The Feeling Of Home

Being elderly and needing daily support from a long term residential care facility doesnt mean your accommodation has to be plain, unstylish, boring, or worse – institutional. With a diverse selection of affordable architectural styles today, even long term care accommodation can let go of the utilitarian architecture and begin with a fresh new start of appealing design that reflects a home-like atmosphere in a functional package.

Designing senior living with a reflection of the past, a base of the practical present and a touch of the future are sure to meet the needs of the aging population as it continues to grow. The senior consumer of the future will come with many profiles and will be looking for living arrangements that reflect a wide expanse of taste, living requirements and values, at a range of price points from affordable to extravagant.

If you had the option to design and build your own home, or a facility that would become your home, wouldnt you let your imagination run wild and creativity soar to include and consider the many possible design options that exist in the resource bank of architecture?

Architecture today is a wide-open array of taste from the old world style with the accents of stone and stucco, tile roofs and heavy beams all very suitable to homebuyers looking for a connection to the historic past. A farmhouse or a country home with simple floor plans, warm colours and cozy spaces would please many individuals looking for a connection to an era of not so long ago. Ranch style homes of the 1950s are ever popular for those looking for a one floor living plan who are not afraid to recapture a retro look, or something more open with glass such as garden doors opening onto a landscaped patio or view of a park like backyard. Designing for seniors means paying attention to details such as uncluttered hallways and wheelchair accessible traffic zones, but it doesnt preclude the designer from planning style and space that feels like home.

Working with an architect to bring together your design ideas, your creativity, an outline of what your needs may be for comfort, space, budget, maintenance and functionality, are all necessary details and requirements that go in to the design of a building that not only serves its occupants but feels inviting like home.

Implement SaaS architecture to improve organizational storage space

These days, organizations are growing rapidly with outstanding performance and productivity. Data is also increasing along with this business improvement. This data includes; finance details, human resource details, requirement and project details and many more. Applications, hardware resources, software programs, operating systems and many more are also considered important information. It is important for every organization to store and maintain this crucial data for longer years. Data storage is the main problem for all IT organizations, as it takes much storage space to save and maintain the data in a device. Usually, servers are used as the main storage devices to maintain the information for future references. But, these servers have the limited capacity and cannot afford large amount of information. Due to this, IT organizations have developed several technologies and applications to enhance the storage efficiency in business enterprises. Cloud technology is one, which provides computing service through internet. Cloud computing is the latest service provided for all industries to enhance their business performance with various services like infrastructure as a service (IaaS), platform as a service (PaaS) and software as a service (SaaS). All these services can help the organizations to get several business solutions. SaaS architecture is the one that provides storage services for the enterprises. It is defined as a deployed software as a service program with a business IT structure and set up. In this architecture service, SaaS also described as storage as a service as it helps the organizations in maintain the important information for further references. Inefficient software programs linking can lead to less efficiency of growth and greater loss of cost; hence, SaaS architecture is important for many business industries. It can provide best profits with great customer service and remote access for various applications and tools to enhancing the business more effectively. It can save the operational costs by reducing the other physical resources as it can save the data in their internet databases. It is more effective to perform IT operations and specialized services to help the enterprises in several aspects to increase the profit margins. It also enables web services to provide various solutions through online using network connections. SaaS is cost effective solution as it is provided by the third party vendors or it can also be paid according to the usage. Hence, most of the small organizations are planning to implement these architectures to enhance their business performances and productivity.

>

For more information on SaaS architecture

Flexpod Net App – Innovative and Dominant Reference Architecture

The converged infrastructure market finds the flexpod net app very innovative and dominant reference architecture. This data center platform from NetApp and Cisco has found appreciation from users worldwide. Many of these users choose to standardize it for mission-critical applications. This was introduced in the year 2010 and has left many impressed owing to its excellent features. The flex pod netapp scores the brownie points in terms of performance, scalability and availability. They can be found in different packages and are easy to deploy and manage. It won’t be out of context to say, they have created a buzz in the IT world worldwide. The availability of flexpodnetapp is the result of a business collaboration entered between Cisco and NetApp. Their joint efforts have been to enhance capabilities and add broader support to important applications. This is done to ensure the FlexPod is able to meet broadest possible range of IT requirements so that most business-critical applications can be run smoothly. They have been credited for supporting various types of data operating systems and virtualization of databases. Likewise, they have made efforts to address various infrastructure needs in the small and medium-sized entities. These enhancements have given the flexpodnetapp an edge in terms of higher-levels of integration. It has facilitated data centers to interconnect by offering them suitable equipment. This has, in a way, made it easy for entities to either scale up or scale out the performance. They have made storage virtualization simple which in turn has made business data management very easy. It also minimizes total cost of ownership dramatically. The technology used helps in logical demonstration of data as per requirements of virtual storage pools. In a sense, it allows you to focus on critical business applications rather than devote time on complexity of the hardware. The storage virtualization capacities come at various levels of storage hierarchy. This can be seen on all storage platforms. The network provisions are flexible and service providers can regulate flexpodnetapp depending on their needs for a specific period of time. This has given them the edge over other available options. Their biggest contribution has been its ability to provide service to more than 1000 servers. Of course, service providers interested to avail their services need to use Flex Pod in order to optimize their functioning. Flex Pod customers are proud to own one as it enables them to enjoy cloud management solutions. Its phenomenal success has prompted Cisco and NetApp to offer multiple data centre architectural designs. This has been accomplished with help of NetApp Cisco Flex pod project.